Dynalite’s new all-purpose module is flexible enough to accept up to four dual-channel or two quad-channel plug-in modules/cards for different loads. This allow its channels to be used for many different functions, including dimming or automation of blinds, curtains or fans etc. This means no more unused channels, as can happen with conventional single function units.
“Dynalite’s range of multipurpose modular controllers heralds the next ‘eco’ generation of Dynalite technology,” said Phil Main, Dynalite Business Development Manager. “No two control systems are alike, and the range of control requirements is ever increasing. By providing the ability to use load-specific modules–whether for luminaire dimming or automation of blinds, curtains or fans–there’s a huge reduction in the waste caused by unused channels in conventional control approaches. Moreover, the system is fully future-proof. A total system upgrade means no more than substituting individual modules. These are all key ingredients for a sustainable future.”
According to Main, the DDMC802GL extends Dynalite’s leading range of cost-effective DIN rail-mountable controllers that support large quantities of small loads in residential, hotel and high density residential applications. “The unprecedented flexibility of Dynalite modular multipurpose controllers extends far beyond controller design,” he said. “It also encompasses installation and serviceability, whereby the cards can be finalised and inserted after installation of the controller. From both an installation and hardware perspective, this results in one of the most cost-effective controllers on a per-channel basis available in the residential and hotel automation space.”
Both the new DDMC802GL and existing DDMC802 modular controllers can control a wide range of loads–including trailing-edge or leading-edge phase control dimmers, HF ballast control (individually programmable DALI, 1-10V and DSI), relay control, fan and curtain control. This makes them the ideal solution for home and hotel automation applications requiring functionality beyond mere lighting control. Moreover, the modular approach ensures an attractive price-point.
Featuring eight channels with a nominal load per channel of 2A, the DDMC802GL (general load) multipurpose controller can accept up to four dual-channel or two quad-channel plug-in modules/cards for different loads. The total box load is module-specific up to 16A. Alternatively, for applications requiring maximum flexibility, the landmark DDMC802–featuring eight single-channel plug-in module slots–can be loaded to a total box load of 16A in all card configurations.
Like all is founded on Dynalite’s world-renowned distributed control philosophy, where control intelligence is distributed about the network and linked via Dynalite’s sophisticated peer-to-peer communications serial bus network, DyNet. Each controller is programmed according to the specific loads it controls, acting upon instructions from user panels or sensors integrated via the DyNet network. Programming access is facilitated by a RS485 DyNet port located on the front of each controller, allowing local network and controller access via PC, without dismantling any equipment. A total of 170 pre-set scenes can be stored on the network for each controlled area.
Other features of the DDMC802GL multipurpose controller include the provision of eight programmable dry contact inputs for hardwiring components to the controller (such as security system override), and an optional clock module, located on the motherboard in order to avoid consuming slot space. Also included is a local override control on the front panel of each controller that allows on/off control of each individual channel in the unlikely event of network failure.
To explore Dynalite’s integrated lighting control and automation solutions, visit Dynalite at Integrated Systems Europe (ISE) 2009: Hall 3, Stand 3A110, RAI Exhibition Centre, Amsterdam, 3 to 5 February, 2009.”
Want More? – You should follow us on Twitter, Like us on Facebook, or subscribe to our RSS feed. You can even get these news stories delivered via email, straight to your inbox every day.
Be the first to comment on "Dynalite DDMC802GL Multipurpose Controller"