Keene KIRAQ is Networked IR and RS232 Control for Sky HD & Sky Q

The new KIRAQ module is part of the Keene IR Anywhere range, and is designed specifically to provide an integrated control solution for SkyHD and Sky Q systems.

READ THIS: Sky Q Review: An Installation Story & Real World Impressions

It allows Sky Q boxes to be controlled via the network and eliminates the need to attach IR emitters to the fascia. It also ensures that only the desired receiver will receive the control signal, ideal for larger installations with multiple receivers where IR bleed can often cause issues.

There are two main modes of operation:

Infra Red – In this mode all received IR commands are converted to IP and sent to the designated IP address of the system to be controlled. The Infra red can be from a remote control aimed directly at a receiver connected to the module or as a cabled input from the output of another system such as an extender or matrix switcher. As there is no common standard for IR emitters a direct cabled connection will need to be routed via a KIRT (IR Translator) to ensure that the KIRAQ receives the IR information correctly.

RS232 – In this mode RS232 commands are converted to IP and sent to the designated IP address of the system to be controlled. Important To directly connect the IR Blaster output from other equipment the signal must be routed via an IR Translator to ensure the KIRAQ receives the signal in the correct format. KIRT Have a look at the connection diagram here (Acrobat pdf file) Have a look at the instruction manual: (note – will open in a new window) Whats in the box? 1 x KIRAQ Module 1 x PSU with 3 pin UK plug 1 x IRSR Infra Red Receiver 1 x RS232 9 pin serial cable

IR Remote Mode – aim your remote at the KIRAQ and control the box wherever it is hidden on the network
IR Direct Mode – connect the blaster output from your switchbox/matrix directly to the KIRAQ instead of sticking a bud on the Sky receiver
RS232 mode – use serial command for integration with many other control systems.
Control4 drivers included, others to follow

Available from Amazon.

No products found.

[UPDATE – Check out this help doc on controlling Sky Q using KIRA-Q and Demopad Software]

keene.co.uk : Read Our Sky Q Review